Primer – First coat: It is applied to provide adhesion between the paint film and the surface. It smoothens the surface, makes it less absorbent and increases the spreading capacity of the paint.

Putty: This is done to fill the minor cracks and surface imperfections.

Second Primer Coat: This is applied to sandwich putty between two primer coats, since painting directly on putty leads to a patchy appearance.

Finish coat: Generally two coats must be applied to get the desired finish and colour. Each coat must be completely dry before the next one is applied. Drying time for different paints vary due to their composition.

Checking the moisture level of walls.

Check the status and type of existing paint.

Decide the configuration of material mix  based on the moisture level and paint on the existing surface.

Invest in washable paints: Handprints and other smudges are always likely to happen, especially near the doorway, staircases, shoe rack and kids’ room. The best way to remove these stains is to ensure you wipe it off as quickly as they appear. Paint formulas these days are backed with Cross-Linking Polymers technology that removes even the most stubborn stains, ensuring the house looks spotless and beautiful. It is always advisable to use washable & cleanable paints for longevity of paint surface.

The best way to wash walls painted with latex paint is to use warm water and a nonabrasive all-purpose cleaner. Dip a clean sponge in the water, then wring it dry. Gently rub the wall

Regular inspections: Ensure that you regularly inspect the exteriors of your house by paying attention to any damages or changes that might cause damage. If you notice any issues straight away, like water damage or other problems then it is important to have a professional inspect it before the problem gets any worse and ends up causing more time and money to repair it.

Use exterior filler to repair any cracks, and move any climbing plants and trellises out of the way as much as possible. Be sure to let the surface dry completely before you start painting. If the surface is flaky or powdery, use a stabilising primer (for exterior masonry) first.

A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates.

Interior primer seals, increases adhesion and creates a uniform surface for walls, etc. Exterior primers minimize cracking and mildew growth, and protect masonry surfaces from alkalinity and efflorescence.

Paints with Low Volatile Organic Compounds ( VOC ) levels are ideal for environment and release less toxic emissions which are harmful to human health. Before deciding on colour and paint, check the lable to see the level of VOC in it.